Light stand for photo umbrellas
Shaoxing Longfan started in 2021. We make fiberglass products. Photographers need light stands for outdoor shoots. Metal stands are heavy. Carrying them is tiring. So we make a stand with fiberglass tubes. The stand is light. It is easy to carry. A wedding photographer in Shanghai used our photo umbrella stand. He said he used to have back pain from carrying metal stands. Now he carries our stand with no problem. He recommended it to his friends. We got many orders from photographers. We have 14 patents. Our annual production is 3000 tons.
Telescopic pole and universal head
We use fiberglass tubes. The outer diameter is 22 mm. The inner diameter is 18 mm. The wall thickness is 2 mm. The pole has two sections. The height adjusts from 0.7 to 1.6 meters. The lock is an aluminum threaded lock. The top has a universal head. The head can rotate 360 degrees. It can tilt 90 degrees. You can point the light in any direction. The head locks tight. It holds the light in place. The bottom has a tripod base. The legs are aluminum. They fold up for storage.
Test data from our lab
We tested the stand in our lab. The table below shows the results.
|
Parameter |
Value / Standard |
|
Tensile Strength |
≥ 500 MPa |
|
Height Range |
0.7 to 1.6 meters |
|
Universal Head Rotation |
360° |
|
Head Tilt |
90° |
|
Head Load Capacity |
≥ 2 kg |
|
Base Spread |
0.6 meters |
|
Total Weight |
≤ 0.8 kg |
|
Surface Coating |
Black matte, non-reflective |
The stand is very light. It weighs less than 0.8 kg. You can put it in a camera bag. The universal head is very flexible. You can angle the light for any shot. The head locks with a lever. Turn the lever, move the head, release. It stays in place. The black matte coating does not reflect light. It will not cause unwanted reflections. The photo umbrella stand is very easy to use.
Stable and durable
The tripod base has a 0.6 meter spread. The legs have rubber feet. They do not slip. The stand is stable even on uneven ground. The fiberglass tubes do not rust. They do not dent like aluminum. They last for many years. The threaded lock is smooth. It does not cross-thread. The universal head is made of aluminum. It is strong.
Why customers buy from us
We support custom orders. Do you need a taller stand? Yes, up to 2 meters. Do you need a different head? Yes, we have 1/4 inch screw heads. Do you need a different color? Yes, silver or black. FAQ: Can I use this for a heavy flash? Max load is 2 kg. FAQ: Is it stable in wind? Use sandbags on the legs. FAQ: Does the head wear out? No, it is tested for 5,000 tilts. The photo umbrella stand is perfect for on-location shoots. Shaoxing Longfan has ISO 9001. We make 3000 tons of fiberglass products each year.
Hot Tags: photo umbrella stand, China photo umbrella stand manufacturers, suppliers, factory
